Features

• Extension wing and sliding fence support longer work pieces
• Heavy-duty 15 amp motor delivers maximum power
• Nine positive stops for cutting common angles
• Cam-lock miter locking system clamps down accurately and fast
• Mounts easily to 2-by-four material for quick job site set-up

Features

• Power to drive nails (up to 3 1/2" x .131") into engineered lumber.
• Uses 30 to 34 degree 2" to 3 1/2" x .113" to .131" paper collated clipped-head framing nails.
• Nail lockout mechanism alerts operator to reload tool.
• Tool-free adjustable exhaust.
• Removable non-marring nose tip with on tool storage.

Features

• CAMY9
• Solid CAST IRON twin cylinder pump ?Up to 10,000* hours of extended life* Over 35% quieter and 60 degreescooler than aluminum pumps with cast iron cylinder sleeves. * Based on B-10 bearing rating
• Cast iron, oil-lubricated pump for quiet operation and long life
• Durable 80-gallon ASME code tank
• Automotive style changeable air filter

Features

• Dual side-by-side laser diodes for an extremely bright, visible beam
• Protected rotary head and side impact roll cage for increased durability
• Built-in bump sensor alerts user if laser has been bumped after leveling
• Factory reconditioned to perform like new!
• Manual leveling system is accurate to + or - 1/4" at 100'

Product Description

Includes Motor -- 16171, Plunge base, Fixed Base, 1/4" S. R. Collet Chuck, 16mm Shaft Wrench, 24mm Collet Nut Wrench, Tool-free Template Guide Adapter, 1/2" S. R. Collet Chuck, Fixed Base Chip Shield, Plunge Base Chip Shield, and Carrying Case. ... Read more

Features

• Wide base openings and 2" subbase openings - Accepts large bits
• Includes a One Year Warranty
• Quick clamp system on both bases - For tool-free conversion
• Microfine bit depth adjustment system on both bases
• Exclusive Precision Centering Design - Centers bit precisely

Reviews (1)

Bosch 1617PK-RT Router
The tool came in a very nice carrying case.However, furnished were 1/2" and 3/8" collet chucks.As far as I'm concerned, the 3/8" collet is absolutely useless.And, all my router bits have 1/4" inch shafts.So, I've been forced to try to find a local Bosch tool dealer (25 miles away) and order (at a cost of $17) the 1/4" collet chuck.It will be here in 5-8 days.Would have been very nice for Amazon.com to furnish this tool with equipment that is used in the trade.Not so!
... Read more

Features

• 30-day satisfaction guarantee and one year warranty on parts and labor
• Exhaust muffler reduces noise
• Metal alloy construction weighs only 5.5 pounds
• Quick jam release
• Open magazine allows easy cleaning, with 156-staple load capacity

Reviews (1)

There's Got To Be A Better Tool Out There
I recently returned the Hitachi Construction Stapler after trying it out on a sheathing and siding job.
I found it inconvenient to work with for a number of reasons.
First, there is no way to direct the exhaust. Sure, I wear goggles, but I also work in remodeling in confined spaces and there is often recent debris around which gets blown into my face. I have a Hitachi brad nailer, and they put a 360 exhaust on that, but not on the stapler.
Second, the only way to adjust staple depth is by fiddling with the pressure regulator on the compressor. Not the hardest thing to do, but hardly convenient. Especially in the conditions where I was working with the compressor located a floor below me. It would have made siding a lot easier if I could have adjusted the staple depth on the tool itself, allowing me to perform different tasks from one setup.
While not a reason to send it back, I was annoyed that the tool came with 50 feet of hose but no hose fitting. Because it is a "professional " model it takes a 3/4 fitting which meant I had to run out to a hardware store on Labor Day to buy 2 fittings to use the tool. A tool box wouldn't have been too much to expect to be included with it either.
While it performed OK for what it was, I'm sure there are tools with better features out there. I think I'll try the Porter Cable next. ... Read more

Features

• Electric brake
• Factory reconditioned to perform like new!
• Rear pivot depth of cut adjustment allows your hand to remain behind the tool at minimum depth of cut
• Powerful 15-amp/2,075-watt motor made for long life and difficult applications
• Heavy gauge, high strength aluminum alloy shoe

Features

• Includes two 1.2Ah batteries, 1-hour charger, 7-piece driver bit set, flashlight, and case
• Two-speed transmission with one-touch torque shift knob
• 22-stage slip clutch for easy torque setting adjustment
• Variable speed switch with electric brake
• 213 in./lbs. of torque; 3/8" keyless chuck

Reviews (2)

ALOT FOR THE MONEY
This is a bargain. You get the drill, two batteries, a charging unit, a case, a built in bit holder with long phillips bit, a small plastic case with 10(or so) bits and the flashlight(adjustable head). This drill has some heft and feels good in the hand. It is well balanced. All the items fit easily into the case. The case has a built in pocket where the instruction fit. This is nice because many times the instructions get in the way when you are trying to close the case. Each battery took about 45 minutes to charge. The other reviewer is right. This drill is not the same as the photo. It is missing the cushioning on the handle.

The only problem I had was that the chuck was jammed open. I had to wrench it free with a couple of pliers.

Picture not the same as tool
The tool I received is not the tool pictured in the sale add.
Mine does not have any of the cushioning that the picture shows.The tool itself is alright but I was expecting it to be the same as the picture the ad showed. ... Read more

Features

• Powerful 1-3/4 HP 10-amp motor
• New "lever-release" height adjustment
• Easy to use Micrometer depth adjustment
• Complete with case

Amazon.com Review

This review refers to the new model of this tool. This is a reconditioned powertool. Reconditioned generally means that the tool has been returned to the manufacturer,who brings the tool back to like-new condition. Some tools may contain cosmeticblemishes. Reconditioned tools come with the same warranty as their newcounterparts.

This Porter-Cable 18-gauge, 2-inch brad nailer is a compact, comfortable-to-carry unitthat might not offer quite as many extras as other (more expensive) units, but it's veryreliable and does its job well. This nailer shoots standard brads from 3/4 to 2 inches longand has an anodized magazine with a reload indicator. The die-cast aluminum body islightweight but still very strong, and the handle is comfortable to hold, even over longperiods of time. The quick-release nosepiece lets you clear jams quickly and easily. Otherfeatures include a sequential fire trigger, a safety that's located behind the driver guide fordriving brads in tight spaces, an easy-to-adjust depth guide, a directional exhaust port,and a removable rubber nose. The kit comes with a 1/4-inch male coupler with dustcover, oil, and a rugged plastic carrying case.--Jonathon Tudor ... Read more

Features

• One year warranty/30 day performance certification
• Uses standard 18 gauge brad nails from 3/4 to 2 inches long
• Adjustable exhaust port and depth-of-drive
• Removable non-marring tip to protect delicate work
• Quick-release nosepiece for fast clearing of jams

Features

• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 1/2-inch square drive with hog ring retention
• Factory reconditioned to perform like new!
• 1,400 in./lbs. of maximum torque for a wide range of fastening applications
• Compact size and weight allows access into tighter areas

Features

• Adjustable, tool-free steel motor cam lock
• Factory reconditioned to perform like new!
• 2-1/4 HP (max. motor HP), for smooth routing in toughest hardwoods
• Electronic variable speed from 8,000 to 24,000 rpm
• Micro-fine depth adjustment ring in 1/64" increments

Features

• Only weighs 7.5 lbs. for user comfort and better control
• Factory reconditioned to perform like new!
• Holds up to 65 full round head nails
• Up to 900 in./lbs. of driving force
• Drive depth adjustment located on tool for convenience

Features

• 2-year limited warranty on machines, parts, and accessories
• 9-amp induction-type ball bearing motor for long lasting trouble free operation
• All purpose 12,500 rpm spindle speed handles any routing or shaping job including horizontal panel raising
• Die-cast aluminum 18- by 20-inch table provides ample work support; integral slot facilitates use of accessories
• Removable on-off switch prevents unauthorized use of machine

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• Tool free blade changing
• Accepts universal and t shank blades
• Horseshoe balance system for cleaner cut

Reviews (3)

a shoeless wonder
The black shoe falls off regularly (which knocks the transparent covers off, as well). Received a replacement, but don't know if it's going to work. Grat for sawing curves with bevels...just can't saw straight at 90 degrees. Blades bend from lateral movement while sawing. Not a good 'un. Go with Bosch or Porter Cable. Got sharp teeth? Buy a coping saw. Or a knife. Wish I had....

I should have bought the Bosch
I am on my second saw in 6 months with little use

Good points:

Lots of power
Accepted universial and T shank blades

Bad points:
Sole plate sticks and is hard to accurately adjust.
Both saws pulled to the left when cutting.
Could not cut a straight line using a guide fence, blade would pop out of guide roller or pull the wood lose from a clamped down guide fence resulting in a bowed cut. The cut was also off perpenducilar. Got two different stories from Dewalt on this. One person said it should saw with a guide fence(straightedge) another person said it wouldn't and I needed to buy a different tool.

Need to improve Keyless blade
I purchased this item and the only problem that I have found is the keyless blade system. The operator manual doesn't mention that you must have the blade attachment at the right position before the keyless blade will function. To set the blade attachments to the right position you will have to operate the jig saw and try to stop the reciprocating blade shaft attachment to the exact position. This will require few trys and lots of patience. ... Read more

Features

• Tool-free depth adjustment
• Factory reconditioned to perform like new!
• Magnesium frame and magazine weighs only 7.5 pounds
• Only 12.75-inches tall, can drive nails in the tightest openings
• Delivers plenty of power, 900 in./lbs. @ 100 psi, for engineered lumber

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• 550-inch/pounds of torque
• Carbide-tipped chuck jaws
• 360-degree side handle

Reviews (4)

Powerful Tool and good quality
I very much like my 24v dewalt. I use it for all my heavy duty drilling for my home.

A word of advice, it is very heavy. If you want a lighter tool then go with the 14 or 18v product. They both work well. If you can handle the weight this tool is the only drill you might need.

I think it is very well made and the unit came like new, and hasn't skipped a beat.

-need this much power? buy a corded
This drill is a heavy, monster of a bad idea. The 18v is really on the edge of being oversized, (I LOVE mine, best ever) but this thing is just plain uncomfortable. So much torque you need two hands, so much weight you will need two hands. TOO MUCH MONEY TO SPEND ON A DRILL THAT WORKS WELL IN SUCH A LIMITED NUMBER OF JOBS. Maybe a pro could find a couple more uses for this, but concrete and steel are the only uses I could figure, and for concrete, you best apt to get the dw004, of which I'm very pleased.
18v is way big enough.

plenty of power short term
This kit doesnt come with any extra batteries and when you use it constantly you will have to take a 1 hour break so that you can recharge your batterie and it has been very difficult to find extra batteries (which are about ...). I wish that I had never bought mine.

Great drill
Excellent two in one tool with plenty of power for any job. It is very well balanced with good feel and its hamemer is at ease in fast penetration of brick, block, stone and concrete of most compression strengths, aggregate compositions and ages. Quick charge system as well. Only downside its price, but you get what you pay for. ... Read more

Features

• Easy blade changes
• Factory reconditioned to perform like new! Limit 1 per order.
• Advanced micro height adjuster
• Soft start and electronic brake
• Variable speed adjustment

Reviews (2)

you cant go wrong
if your lookin to get a hard working 2 h.p. plunge router but are "ify" about spending alot of cash than you got to get this p.c. recon. has plenty of power and easy to handle works great as hand held and as an undermount...gulit free spending

Porter Cable's answer for delicate inlay's
This is the perfect router for fine woodworking inlay work, with the soft start woodworker's won't need to worry about moving jigs and guide plates on start-up, it is also nice for those of you that install Soss hinges, and of course Porter Cable is second to none when it comes to routers, I rate this as a top buy for all you woodworkers. ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order
• 5.2 amp motor
• Can remove up to 3-/32-inch in a single pass
• 1/2" rabbeting capacity

Reviews (1)

DeWalt DW680KR review
An amazing tool for the home shop enthusiast or professional woodworker. This device has a simple and comfortable feel to it and requires little practice to master. The easy to read and precise blade depth adjustment is one of the best features of this product. The location of the cord exit is also a nice and well thought out feature. I had to retire (begrudgingly) my Makita planer that dad passed on to me after many years and thousands of hours of trouble free use. the DeWalt name has proven itself time and time again as an industry leader in quality for professionals and new users. To prove the quality if the tool, we demonstrated the power of the planer on an 8" diameter green pine log at the hardware show here in the Twin Cities. I had many amazed looks as we accurately shaved off the bark and worked the piece down to a nice & clean square in short order. **Please do not try this with your tools at home as it is not designed for this particular use.** It was utilized as a drastic example to prove the power and functionality of the tool. You are always at your own risk with any tool. (power or otherwise) Wear all the OSHA approved safety equipment at all times. You can't buy a new set of hands, eyes or ears at any hardware store. No one stocks them yet. Enjoy all the DeWalt products, I most certainly do.
Jeffrey B. Curtis
Plymouth, MN ... Read more

Features

• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 3/8-inch square drive with hog ring retention
• Factory reconditioned to perform like new!
• 1,200 in./lbs. of maximum torque for a wide range of fastening applications
• Compact size and weight allows access into tighter areas