Features

• Helical cut steel, heat treated gears for long gear life
• Factory reconditioned to perform like new!
• 7.8-amp motor with variable speed
• Jacobs-keyless chuck with spindle lock provides greater holding power
• Rubber grip and two-finger rubber trigger for increased comfort

Features

• Wide trigger and comfortable handle for secure grip and less fatigue
• Factory reconditioned to perform like new!
• Powerful 9.5 amp motor for superior cutting power in a wide variety of materials
• Lever action blade clamp for fast changes without touching the blade
• Push-button adjustable shoe for versatility and longer blade life

Features

• External brush caps for easy servicing, tool weight: 8.25 lbs
• Factory reconditioned to perform like new!
• Electronic module provides full power, even under load, from 0-1,000/0-3,000 rpm, 5/8- to 11-inch Spindle thread
• Conveniently located variable-speed dial lets you adjust speed for different materials and applications
• Heat-treated, precision-cut gears for smooth operation

Features

• Tool-free jam clearing and 360-degree exhaust
• Factory reconditioned to perform like new!
• Lightweight magnesium frame, weighs only 3.9 pounds
• Five position vertical slide for indexed depth setting
• Dual load magazine can be used either as "load and lock" or "lock and load"

Features

• One-year warranty through the DeWalt factory or an authorized service center
• Lightweight contractor-grade saw, 9.8 pounds
• Innovative composite shoe withstands an 8-foot drop
• 56-degree beveling capacity with stops at 22.5- and 45-degrees
• Clear blade line-of-sight from any user view

Features

• Circular Saw has a 50 degree bevel.
• carries a 1 year warranty
• Drill/Driver 1/2" single sleeve chuck
• Drill/Driver 0-450RPM/0-1,500 RPM
• Drill/Driver Over 425 inch pounds of torque

Amazon.com Review

From the moment you get your hands on it, you'll appreciate thequality of this router. The handles offer total comfort and confidenceas you guide this 11-1/4-pound beauty around. Its soft start means nojerking, even when you start it at its peak speed of 22,000 rpm (itsbottom range is 8,000 rpm). The 15 amp motor is quieter than you'dexpect in a router this size, and the rack-and-pinion depth adjustmentDeWalt is known and loved for comes equipped with a magnified scale anda micro fine-adjustment knob. The plunge mechanism is smooth assilk--better than on routers twice the price--and it would serveperfectly in a table or for freehand work. The 625 comes with 1/2- and1/4-inch collets, and when it's time to change the bit, you'll reallyappreciate the spindle-lock button; it's a big square with a fingerdepression, unlike most other routers that offer either two wrenches towrestle with or a small, sharp spindle-lock pin that leaves a red dentin your finger. Other nice features: one side of the base is roundedand one is flat, and it comes with a dust-extraction adapter. Thispiece of machinery truly is as close to flawless as a router can get.--Kris Jensen-Van Heste ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• 15 amp 3 hp motor
• Variable speed 8000-22000
• Phosphorous bronze bushings for the smoothest plunge

Reviews (1)

SMOOTH MOVE
THE SLIDE RODS ON THIS ROUTER IS SMOOTH UP AND DOWN AND NONE STICKYNESS MAKES THI TOOL A JOY TO OPERATE.THE EASY REACH THUMB SWITCH MAKES FOR A NONE TIRING OPERATION.EVEN THOUGH THIS IS A RECONDITIONED TOOL IT STILL HAS A LIKE NEW WARRENTY.............. ... Read more

Features

• Tool-free jam clearing and 360-degree exhaust
• Factory reconditioned to perform like new!
• Lightweight magnesium frame, weighs only 3.85 pounds
• Five position vertical slide for indexed depth setting
• Dual load magazine can be used either as "load and lock" or "lock and load"

Features

• Externally replaceable bushes for easy serviceability
• Factory reconditioned to perform like new!
• Easy forward and reverse, AC/DC
• High torque, 434 in./lbs. of torque
• Ball bearing construction for durability

Features

• Flip the switch for hammering, chiseling and material removal applications
• Factory reconditioned to perform like new!
• 6.9-amp motor
• Features a built-in clutch to prevent sudden torque reaction
• Variable speed

Features

• Three year limited warranty
• 2.5 HP, 4.3-gallon oil-lube compressor
• Direct drive, no belts or adjustments are necessary
• Patent pending oil-lube system with ball bearing design
• Full roll cage with high flow regulator and dual quick-connects

Reviews (1)

Factory-Reconditioned Porter-Cable
To start with it was boxed with oil in it and just the dip stick no plug, So needless to say when I got It the box was soaked and the reservior was empty, the manual was also oil soaked .The cage had been repainted and overspray was on most of the labels, the data plate with the S/N and P/N was just about unreadable. One of the feet was ripped off and the cage was twisted. The box was nowhere near adequate for something that heavy it had several 3"-4" rips from it sliding around in the box.needless to say I was vary disappointed in Porter-Cable. I patched the box and sent it back and ordered a new Makita. ... Read more

Product Description

Includes (2)--2.4A-h Batteries, (1)--1 Hour Charger - BC004, (1)--Rip Fence, (1)--Mag Bit Holder - 2610917319, (1)--Side Handle - 2602025126, (1)--Bit Case - 2610915997, and (1)--Carrying Case - 2610917460. ... Read more

Features

• Auxiliary handle
• BOSR9
• 18Volt
• (2) 2.4a-h batteries
• 1 Hour Charger

Features

• All metal planetary gears for increased speed and durability
• Lightweight design (5.2 lbs.) for reduced operator fatigue
• High performance motor delivers 400 in.-lbs. of maximum torque for big jobs
• Dual speed range: 0-450 / 0-1,500 rpm for versatile performance
• 1/2-inch keyless ratcheting chuck for increased gripping strength

Features

• Compact ergonomic design, 6.7 pounds
• Factory reconditioned to perform like new!
• Lever action keyless blade change
• Variable speed trigger operates saw at 0-2,400 spm
• Lever action keyless blade change & 1-1/8" blade stroke

Features

• Includes case
• Factory reconditioned to perform like new!
• AC/DC forward/reverse rocker switch
• Delivers full power; 240 ft./lbs. of torque in forward and reverse
• Detent pin for secure socket retention

Features

• Only weighs 7.5 lbs. for user comfort and better control
• Factory reconditioned to perform like new!
• Holds up to 80 31-degree clipped head framing nails
• Up to 900 in./lbs. of driving force
• Drive depth adjustment located on tool for convenience

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Cuts up to 6" base horizontally
• 0-to-50 degree right and left miter, 0-to-48 degree bevel capacity
• 11 positive miter stops for quick setting to most common angles
• Tall sliding fence supports up to 4-1/2" crown molding vertically nested

Features

• Muffled, adjustable exhaust port
• Factory reconditioned to perform like new! Limit 1 per order.
• Uses standard 32 to 34 degree paper-tape collated clipped-head stick nails
• Adjustable exhaust port and depth-of-drive
• Non-marring tip for sheathing and decking

Reviews (4)

Good tool, Good price
You would never know my nailer was a refurbished tool if it didn't come advertised that way. It was ready to use, no adjustments needed. I've been running three inch nails through it pretty hard since it arrived and it has been just great.

I'm working faster and more accurately now than before. The clipped head nails are just fine. They don't have that nice look that a full head has, but hey, it's framing not fine woodworking. Clipped head nails are much more common locally than the full heads and much more affordable. I've heard a rumor that Senco makes an offset full head nail that will feed through a clipped nailer if it's really that important to have that look.

My only complaints about the gun are that they should ship it with both triggers and it is a bit on the heavy side. You won't hear too much griping from me, however, when you consider what I paid for it. I've used better framing nailers, but not for under $200.00.

[not the best]
In the 1/2 hour of trying to use this tool, it was only able to function properly for 5 minutes. I have other Porter Cable products and have no touble with them. This nailer however just kept jamming at the end of slide area. It needs a guide at the end of the track to stop the nails from "bunching up" at the driver head area. It would not drive a nail and then it would drive two at once. This produces a massive recoil that almost dislocates your shoulder. Porter Cable needs to add a spring steel guide to keep the strip nails inline. This should stop the need for the constant unjamming of the feed track & driver assembly.

Love this nailer but supplies are an issue
This nailer works really well and has been one of the best tool purchases I have ever made. On my current project, time is an issue and this tool is helping me stay on schedule.
In my area, the Paslode brand of nails are the only ones stocked. As they are 30 degree strips and not the 34 degrees specified by Porter-Cable, they sometimes don't feed so you have to give the feeder spring a flick once in a while. The no feed happens about once every 300 nails. For my project it's an inconvenience I can live with compared to banging nails by hand.
Overall though, I think I've made a good purchase. The re-conditioned unit I bought didn't have a mark on it - would have sworn it was brand new, but it came at a much better price.

PC FC350 Hits Nail On Head
I purchased this gun in October 2001. My friend used it first to build a huge deck (can you believe that a friend would use your new nail before you even used it once). He went through a box of about 4000 nails installing the deck without a single jam. I have run about another 500 nails of various sizes (2" to 3.5") with the same results. Considering the quality of the gun, I think the the price is very reasonable. The gun is well balanced but is a little tooooo big for my taste. I prefer my FN250 when using smaller nails.

On the plus side, when other guys walk by, the big gun certainly looks macho.

Would I recommend it to you---Yes. ... Read more

Features

• Wool bonnet not included
• Factory reconditioned to perform like new! Limit one per order.
• 11 amp, 0-1,700 RPM: AC only
• Exclusive electronic speed control - ideal for clearcoat finishes
• Spindle lock for convenient accessory change and Quik-Lok detachable cord

Reviews (1)

For Professional Only..
This is the best high speed buffer you can buy. I have used them for years in the past to buff out cars. Dropped them, run them over with cars, burnt the edges of paint on cars with them and made a lot of money with mine. I have had Makita and DeWalt in the past and had problems with both. The only problem I had with the Milwakee is the electrical cord shorting out. That was after years of abuse. The balance and weight of the machine also feels better. If you are an auto bodyman, painter or detailer, this is a must have tool. If you just want to wax your car you don't need this. You also can damage your paint if you don't know how to use it. If you do know how to use it, may be the last one you'll ever need. ... Read more

Features

• 25 foot cord
• Silent clutch
• 4,000 RPM
• 6.4 Amp motor
• 73 inch pounds of torque