Features

• Shaft lock for easy blade change
• Factory reconditioned to perform like new! Limit 1 per order.
• 13 amp motor
• Dual position depth adj. knob
• Bevels up to 45 feet left/ miters 0-47 left and up to 52 right

Reviews (2)

Makita 10" Dual Compound Slide Saw
Nothing less than what you'd expect in quality and performance in a Makita product. Well made and easy to use. The one design flaw is in the short fence which makes it difficult to cut large or tall molding. Reconditioned tools from Makita are a bargain, coming with a factory warranty - hard to loose.

Great Job Saw
I have Owned My saw for over 10 Years & being a carpenter by trade it has done a terrific job & still is going strong ... Read more

Features

• Adjustable footplate
• Variable speed
• Clic blade change system
• High efficiency 5 amp motor

Reviews (1)

Best Jig Saw on the Market!
I kid you not, this thing is AWESOME!!! I bought it to cut some curves in 7/8" Black Walnut and it cuts it like warm butter with a hot knife! I mean to tell you, this saw is great! ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• Features a 13.0 amp high-torque motor
• Telescoping fence delivers 24-1/2 inch rip capacity
• Limit one per order

Features

• Electric brake
• Factory reconditioned to perform like new!
• Rear pivot depth of cut adjustment allows your hand to remain behind the tool at minimum depth of cut
• Powerful 15-amp/2,075-watt motor made for long life and difficult applications
• Heavy gauge, high strength aluminum alloy shoe

Features

• Compact ergonomic design, 6.7 pounds
• Factory reconditioned to perform like new!
• Lever action keyless blade change
• Variable speed trigger operates saw at 0-2,400 spm
• Lever action keyless blade change & 1-1/8" blade stroke

Features

• Extension wing and sliding fence support longer work pieces
• Heavy-duty 15 amp motor delivers maximum power
• Nine positive stops for cutting common angles
• Cam-lock miter locking system clamps down accurately and fast
• Mounts easily to 2-by-four material for quick job site set-up

Features

• 13-amp motor for powerful cutting action
• Crosscuts a 2x6 or a 4x4 at 90 degrees for a variety of applications
• Electric blade brake stops blade quickly
• Pre drilled base holes for easy bench mounting

Features

• Extra large chute and bag provide superior dust collection
• Side extensions and vertical work clamp provide support and stability for an accurate cut
• Powerful 15 amp, 3500 rpm motor for maximum cutting power
• Large horizontal handle is positioned to reduce operator fatigue and provide better control
• Tall sliding fence and extensions for extra support

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• Tool free blade changing
• Accepts universal and t shank blades
• Horseshoe balance system for cleaner cut

Reviews (3)

a shoeless wonder
The black shoe falls off regularly (which knocks the transparent covers off, as well). Received a replacement, but don't know if it's going to work. Grat for sawing curves with bevels...just can't saw straight at 90 degrees. Blades bend from lateral movement while sawing. Not a good 'un. Go with Bosch or Porter Cable. Got sharp teeth? Buy a coping saw. Or a knife. Wish I had....

I should have bought the Bosch
I am on my second saw in 6 months with little use

Good points:

Lots of power
Accepted universial and T shank blades

Bad points:
Sole plate sticks and is hard to accurately adjust.
Both saws pulled to the left when cutting.
Could not cut a straight line using a guide fence, blade would pop out of guide roller or pull the wood lose from a clamped down guide fence resulting in a bowed cut. The cut was also off perpenducilar. Got two different stories from Dewalt on this. One person said it should saw with a guide fence(straightedge) another person said it wouldn't and I needed to buy a different tool.

Need to improve Keyless blade
I purchased this item and the only problem that I have found is the keyless blade system. The operator manual doesn't mention that you must have the blade attachment at the right position before the keyless blade will function. To set the blade attachments to the right position you will have to operate the jig saw and try to stop the reciprocating blade shaft attachment to the exact position. This will require few trys and lots of patience. ... Read more

Features

• Clear blade line-of-sight from any user view
• Factory reconditioned to perform like new!
• Lightest contractor-grade saw available, 9.5 pounds
• 15-amp, 2,200 max watts out motor
• 56-degree beveling capacity

Features

• Pivoting fence supports larger stock
• Factory reconditioned to perform like new! Limit 1 per order.
• 15 amp motor; 3,200 rpm
• Horizontal D-handle for easy, comfortable use
• Electronic speed control

Reviews (2)

Sweet Saw
Smooth is the word here ...... soft starts, and no bogging down with the electronic motor control. Dead on right out of the box. Nice cutting capacities ......... will do the vast majority of what a SCMS will do for a lot less money. Easy to carry despite its size- handle is in just the right spot. Highly recommended.

Happy with my Makita RLS1220
The Makita was delivered in six days. Everything was in excellant condition. I have had no problems with the saw and I love it! The larger size blade is exactly what I need in order to cross cut the various sizes of lumber I am working with. I believe the 12" saw will work better than the sliding 10" compound Makita. I encourage anyone who would go with a 10" to step up to the 12" blade. ... Read more

Features

• One-year warranty through the DeWalt factory or an authorized service center
• Lightweight contractor-grade saw, 9.8 pounds
• Innovative composite shoe withstands an 8-foot drop
• 56-degree beveling capacity with stops at 22.5- and 45-degrees
• Clear blade line-of-sight from any user view

Features

• 1/4-inch capacity in mild steel, 3/4-inch in aluminum and 2-3/8-inches in hardwood
• Factory reconditioned to perform like new!
• Variable-speed trigger allows user to match blade speed with the application
• 0-3100 strokes per minute
• 1-inch blade stroke with 4-positon orbital action

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Cuts up to 6" base horizontally
• 0-to-50 degree right and left miter, 0-to-48 degree bevel capacity
• 11 positive miter stops for quick setting to most common angles
• Tall sliding fence supports up to 4-1/2" crown molding vertically nested

Features

• Six-month warranty on Delta reconditioned tools
• Variable speed for the best cutting results in a variety of materials
• Quick-set blade chuck for quick, easy blade changes
• Induction-type motor provides quiet, smooth power for less vibration
• Cast iron construction to reduce vibration

Reviews (1)

A piece of junk!
I received this supposedly factory reconditioned scroll saw today and set about putting it together. First, not all the parts were there. Second, the tilt table gauge was bent nearly 60 degrees out of whack. The variable speed knob just spins around and around and has no effect on the speed of the unit.

This thing belongs in the trash can. If I don't get some satisfaction from Delta and The Tool Crib, it's sayonara to both of them.

This saw is junk when it's brand new. Buyer beware! ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order
• Lever action keyless blade clamp
• Electric brake for greater control
• Three position adjustable shoe

Reviews (1)

Power, durability and economy...
What a deal! I just received my Dewalt 24v recip. saw and I'm happy with my purchase. While I haven't had a lot of time to put it to work, I did get the opportunity to cut through a few 4xs and 2xs. This saw is fast and accurate. The cuts were flat and the speed/torque was, perhaps, a bit better than my low-end Dewalt corded recip saw. The heft and construction are superior to Dewalt's 18v line and just about any other cordless I've tried (Milwaukee & Ryobi).

Be advised that Dewalt has just introduced a new battery and charger for the 24v line. The new kits weigh in at [the price] and come with two batteries instead of 1. For the price, however, this 24v reconditioned is a steal. I've also been assured by Dewalt that the new batteries will work with the old tools. They stated that the old charger will work with the old batteries, but I'm not sure if there's any penalty by not having a "fan-cooled" charger with the new batteries. These batteries offer 1.7 amp hours... The new 24v batteries offer longer run-time (~2.4 amp hours) and a longer recharge-life due to the built-in fan.

Aside from the batteries, the Dewalt techs assured me that the two saws are comparable. They said the only tool that has been changed is the 24v hammer drill (the new model has three speeds instead of two). For me, the 24v reconditioned is a good deal since I can use the battery from my 24v circ saw (also a great tool). If I was only planning on buying one Dewalt tool, I'd consider the new kit with two batteries. Pros might consider the two-battery kit as well. ... Read more

Features

• 7-1/4" 24 tooth carbide blade included
• 15 Amp Motor
• 55 Degree Bevel
• 10 pounds
• 5800 rpm

Features

• 1 Hour Charger
• Carry Case
• 24 volt
• Dual Stroke 1 1/4" & 3/4"
• (2) 2.4A-h Batteries

Features

• Six-month warranty on Delta Reconditioned Tools
• Up front, tool free adjustments for blade changes and tensioning
• Large cast iron table with avobe table bevel scale
• Variable speed from 600 to 1600 strokes per minute for cutting a variety of materials
• Removable dusct collection box with adapter for vacuum hookup

Reviews (3)

Delta 40-570R 16" Variable Speed Scroll Saw or 40 blades
OI ,

Moro no Brasil, Rio de Janeiro, Rj

Trabalho com Arte em Madeira e preciso aumentar minha produção e esta máquina é ideal. Preciso também inclua: Blades 40-Fourty.
Obrigado, Jorge Luis

Delta 40-570R 16" Variable Speed Scroll Saw
OI ,

Moro no Brasil, Rio de Janeiro, Rj

Trabalho com Arte em Madeira e preciso aumentar minha produção e esta máquina é ideal. Preciso também inclua: Blades 40-Fourty.
Obrigado, Jorge Luis

Purchased new from Amazon a 40-570 Scroll Saw
Several weeks ago I purchased thru Amazon a brand new 40-570 Scroll Saw. It arrived in A-1 Condition and I have been totally thrilled with the purchase. I trust Amazon completely. And this saw is perfect for me....it was low-end price-wise, yet has all the features that are important to me....the ability to stop and reset for fretwork takes literally seconds instead of minutes. I would redo this purchase again in a hearbeat. In fact, I'm now looking for a bench-top table saw..... Thanks Amazon, for this rural user you are a Godsend!!!! ... Read more

Features

• One year warranty/30 day performance certification
• Factory-reconditioned to perform like new! Limit 1 per order.
• Interchangeable Network battery system
• Cuts through 2X lumber, at 45 degrees
• Miter lip on lower guard

Reviews (2)

Eats batteries
This is is nice quality saw that works well, but has one drawback. It eats batteries very quickly. And when the battery even starts to get low it completely looses all torque power. The only way to work with this saw is to have at least 3 batteries available and charged before starting work. But it will cut like a workhorse as long as you feed it batteries.

dead battery
You would think they would at least put a new battery in a reconditioned tool. The saw seems to work fine but the battery lasts about 2 minutes. Any savings I received from buying a used tool will be gone with the purchase of a new battery. beware. ... Read more